{"product_id":"leather-stitching-pony-beech-wood-clamp-180-adjustable-foldable","title":"Leather Stitching Pony: Beech Wood Clamp, 180 Adjustable, Foldable","description":"A professional beech wood leather stitching pony with 180-degree angle adjustment, adjustable clamp width, and a foldable design for easy storage. Holds leather firmly in place while you saddle stitch, freeing both hands for clean, even stitching on every project.\u003cbr\u003e\n.\u003cbr\u003e\n.\u003cbr\u003e\n★ WHY YOU NEED A STITCHING PONY\u003cbr\u003e\nHand stitching leather without a clamp means holding the work with one hand and stitching with the other. The result is uneven tension, wandering stitch lines, and sore hands after just a few minutes. A stitching pony changes the entire experience.\u003cbr\u003e\nThe pony grips your leather securely at the ideal angle, leaving both hands free to pull the needles through cleanly and evenly. Saddle stitching becomes faster, more consistent, and genuinely enjoyable. It is one of the most impactful upgrades a leatherworker can make, and the difference is noticeable from the very first stitch.\u003cbr\u003e\n.\u003cbr\u003e\n.\u003cbr\u003e\n★ WHAT'S INCLUDED\u003cbr\u003e\n◦ 1 x beech wood leather stitching pony clamp\u003cbr\u003e\n◦ Steel threaded adjustment rod with black knurled knobs\u003cbr\u003e\n◦ Steel hinge mechanism for 180-degree angle adjustment\u003cbr\u003e\n◦ Base plate with pre-drilled fixing hole (can be clamped to a desk or used freestanding)\u003cbr\u003e\n◦ Assembly hardware included\u003cbr\u003e\n◦ Ships flat-packed with simple 4-step assembly\u003cbr\u003e\n.\u003cbr\u003e\n.\u003cbr\u003e\n★ KEY FEATURES\u003cbr\u003e\n180-degree angle adjustment\u003cbr\u003e\nThe clamp column pivots on a steel hinge from fully upright (vertical) through to fully flat (horizontal) and any angle in between. Set the leather at the angle that suits your stitch — upright for belts and long straps, angled for wallets and small panels, near-horizontal for awkward pieces. Tighten the adjustment knobs to lock the angle firmly in place mid-project.\u003cbr\u003e\nAdjustable clamp width\u003cbr\u003e\nThe two beech jaw blocks are controlled by a threaded steel rod with knurled adjustment knobs on both sides. Turn to open or close the jaws to match the thickness of your leather. The maximum jaw opening is 2cm, suitable for single and multi-layer leather work up to that thickness. Tighten both knobs evenly for a secure, wobble-free grip.\u003cbr\u003e\nFoldable and compact\u003cbr\u003e\nThe clamp column folds flat against the base plate for storage. When folded it takes up minimal bench space and can be stored in a drawer or alongside your leather tools. Assembly from flat to working position takes under two minutes.\u003cbr\u003e\nSolid beech wood construction\u003cbr\u003e\nThe jaws, column, and base are all made from beech wood, which is hard, smooth, and durable. The surface is sanded to a clean finish that will not snag or mark your leather. Beech is the standard material for professional-quality stitching ponies because it combines rigidity with a slight natural give that grips leather without crushing it.\u003cbr\u003e\nFreestanding with optional desk fixing\u003cbr\u003e\nThe wide base plate (39cm x 7.5cm) keeps the pony stable on a workbench without clamping. The pre-drilled hole in the base allows you to fix it permanently to a bench with a bolt if preferred.\u003cbr\u003e\n.\u003cbr\u003e\n.\u003cbr\u003e\n★ SPECIFICATIONS\u003cbr\u003e\n◦ Material: Beech wood with steel hardware\u003cbr\u003e\n◦ Total height (assembled, upright): 43cm \/ 16.93 inches\u003cbr\u003e\n◦ Base plate: 39cm x 7.5cm \/ 15.35 x 2.95 inches\u003cbr\u003e\n◦ Clamp column: 43cm tall, 6.6cm deep, 5.6cm wide\u003cbr\u003e\n◦ Jaw (clip) size: 9.7cm x 4.5cm\u003cbr\u003e\n◦ Maximum jaw opening (clamp width): 2cm\u003cbr\u003e\n◦ Angle adjustment range: 0 to 180 degrees\u003cbr\u003e\n◦ Assembly: 4 steps, no tools required beyond the included hardware\u003cbr\u003e\n.\u003cbr\u003e\n.\u003cbr\u003e\n★ HOW TO ASSEMBLE — 4 STEPS\u003cbr\u003e\nInsert the steel threaded rod through the base of the clamp column\u003cbr\u003e\nAttach the knurled adjustment knobs on both sides and tighten loosely\u003cbr\u003e\nAttach the hinge bracket and secure with the included fixings\u003cbr\u003e\nSet the angle using the hinge, tighten the locking knobs, and the pony is ready to use\u003cbr\u003e\nFull visual assembly guide is shown in the product images.\u003cbr\u003e\n.\u003cbr\u003e\n.\u003cbr\u003e\n★ HOW TO USE IT\u003cbr\u003e\nSet the clamp angle to suit your project — upright for most work, angled for better access on curved pieces\u003cbr\u003e\nOpen the jaws by loosening the knurled knobs\u003cbr\u003e\nSlide your leather into the jaws at the point where you want to stitch\u003cbr\u003e\nTighten both knobs evenly until the leather is held firmly without marking\u003cbr\u003e\nStitch with both hands free — pull the needles through cleanly on each side for even saddle stitch tension\u003cbr\u003e\nLoosen, reposition, and re-tighten as you work along the stitch line\u003cbr\u003e\n.\u003cbr\u003e\n.\u003cbr\u003e\n★ WHAT YOU CAN MAKE WITH IT\u003cbr\u003e\nThe stitching pony is used wherever hand saddle stitching is needed:\u003cbr\u003e\n◦ Belts and watch straps\u003cbr\u003e\n◦ Wallets, card holders, and bifolds\u003cbr\u003e\n◦ Bag handles and shoulder straps\u003cbr\u003e\n◦ Notebook and journal covers\u003cbr\u003e\n◦ Keyrings and luggage tags\u003cbr\u003e\n◦ Shoes and sandal straps\u003cbr\u003e\n◦ Pouches and accessories\u003cbr\u003e\n◦ Any leatherwork requiring a clean, even hand stitch\u003cbr\u003e\n.\u003cbr\u003e\n.\u003cbr\u003e\n★ WHO IT'S FOR\u003cbr\u003e\n◦ Leathercraft beginners who want to stitch properly from their first project\u003cbr\u003e\n◦ Intermediate and advanced leatherworkers who need a reliable, adjustable bench tool\u003cbr\u003e\n◦ Hobbyists who make wallets, belts, or bags at home\u003cbr\u003e\n◦ Anyone frustrated by trying to hold leather and stitch at the same time\u003cbr\u003e\n◦ Gift buyers looking for a quality tool for a leathercraft enthusiast\u003cbr\u003e\nThe 180-degree adjustable design and beech wood construction make this suitable for both occasional hobbyists and regular workshop use.\u003cbr\u003e\n.\u003cbr\u003e\n.\u003cbr\u003e\n★ STITCHING PONY VS HOLDING BY HAND\u003cbr\u003e\nHolding leather by hand while stitching produces uneven tension, inconsistent stitch spacing, and significant hand fatigue. Even experienced leatherworkers cannot replicate the control a pony provides over a long stitch run.\u003cbr\u003e\nThe pony holds the work at a fixed angle with consistent pressure so every stitch is pulled with the same tension on both needles. The result is a tighter, more even saddle stitch with visibly better quality — and you can stitch for much longer without discomfort.\u003cbr\u003e\n.\u003cbr\u003e\n.\u003cbr\u003e\n★ DISPATCHED FROM THE UK\u003cbr\u003e\nAll CraftMint orders are dispatched from the UK with tracked postage available at checkout. Fast delivery with no customs delays for UK buyers.\u003cbr\u003e\n","brand":"TradeMint","offers":[{"title":"Default Title","offer_id":58002651185487,"sku":null,"price":31.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/7861\/0767\/files\/il_fullxfull.8210812609_or2o.jpg?v=1782066015","url":"https:\/\/craft-mint.com\/products\/leather-stitching-pony-beech-wood-clamp-180-adjustable-foldable","provider":"TradeMint","version":"1.0","type":"link"}